WHY YOU NEED A FLAT SUBFLOOR TO INSTALL FLOATING WOOD FLOORS

Most problems and problems with floating wood floors are a result of one particular glitch-an uneven subfloor. Although many people assume level subfloors are needed under floating wood flooring, the reality is a bit more complex. Having a level subfloor ensures that your floating engineered hardwood flooring fits well.

The Difference Between Level and Flat
A flat floor might be significant in a billiard hall, but you may actually put in floating floors onto an unlevel subfloor without a problem (besides having difficulty playing pool in this area ). It is when the floors are irregular that the real issues arise.

Level and level can appear that the exact same item, but a flat floor can be out of flat (to a certain level ) and still help to create a base for comfortable, silent wood floors.

Lay it on the ground and have a peek at the edge of the subfloor. This long stretch of wood should uncover any irregular spots, including dips, hills, and gullies. These conditions will produce squeaks, groans and resilient stains.

Typical Problems With Your Wood Floors

You might observe loud and intrusive noises coming out of your new floating engineered flooring. It could be creaking, squeaking or a hollow knocking sound. All of that racket outcomes from uneven flooring. When floating wood flooring rest in an irregular surface, and pressure is applied to the peak of the flooring, the consequent movement proceeds to make a noticeable sound. Based on the kind of hardwood you have, this noise ranges from high to deep and hollow. A perceptible dip can also result from lower spots; the floor gives a bit more when walked on, only to bounce back with greater force than stains only inches away.

Correcting the Uneven Subfloor
Most experts would agree that the maximum tolerance on a subfloor will be 3/16″ over a ten-foot span. Any dips and mounds that exceed that amount need to be adjusted

The method of correction is dependent upon the kind of subfloor in your home. Concrete subfloors are adjusted by screening. This procedure involves filling in reduced spots with new concrete and leveling that off to create a smooth, flat area.

It may be a fantastic idea to phone in a professional installer when uneven subfloors are an issue in your home. They can be fixed, but it is going to have a fair amount of perspiration and the right equipment to manage this initial and crucial step.

Flat subfloors produce quiet, nicely laid floating timber floors. Uneven conditions could be fixed ahead of time, and make it possible for you the greatest pleasure and value in your flooring investment. For Advice on subfloor therapy and locating the best hardwood flooring for each job, call your flooring pro at Norwood Floor Sanding .

WHY YOU SHOULD CONSIDER VENT COVERS FOR YOUR HARDWOOD FLOORS

Heat rises and that’s one of the reasons many houses have their duct vents in the flooring. While this can be great for keeping your house warm on a chilly winter day, the coated metal drop-in vent registers installed by the majority of HVAC companies don’t do much to your interior decoration — especially when put in that beautiful prefinished wood floor that was just installed.
Luckily, you’ve got other options — vent registers are given in numerous styles and species which can complement your hardwood floor. The vents can be found as either flush mount that sits down with the surface of your wood floor or surface mount which may be just be fastened over the duct opening.

Flush Mount Vents
When installing new hardwood floors, flush mount vents should always be considered. These vents provide a more seamless transition and provide an unparalleled sense of style. A variety of patterns are offered for those looking for something unique.

Most common vent sizes are 4″ x 12″ and 2″ x 12″. To figure out what sizes you need for your wood registers just assess the interior of the ductwork openings. When measuring for flush mount ports, also pay attention to the thickness of your hardwood flooring. It’s not uncommon for the metal ductwork of a floor port to be compressed through construction so make sure to push it all the way open before measuring. Bear in mind that you’re ordering the size of the opening — not the overall size of this register.

Next time you do your hardwood floors check to the regional flooring provider or reliable salesperson to find the best deals out there. While these are not cheap it’s completely worth it for the compliments you’ll get.

Surface Mount Vents (Drop In)
Surface mount vents also known as a drop-in port is a great alternative option for replacing your current installation. These won’t require any cutting to be installed, simply replace the old vents with the correct dimensions and drop them in. To begin with you may wish to find out the appropriate wood species and blot on your own hardwood floors in order to match them up. For custom colour matching, send a sample to the regional dealer or give us a call now.

HOW YOUR FLOOR WILL CHANGE COLOUR OVER TIME

The aging of a hardwood floor is certainly not something to get hung up about as this is all a part of this organic process. If you’re worried that your flooring is changing, rest assured that although it is a fact that there will be a noticeable difference in shading over time, this may be seen as a good thing.

Since the floor gets older and the wood and finish go through oxidation, on account of the ultra-violet light from sunlight, the colour of the wood mellows and deepens.

If you’ve got a lighter colour of timber floors, then this colour change will be predominant as it begins to darken. There are also certain species like Brazilian cherry and Iroko that are known to become darker naturally.

This entire process does take some time so you may not detect any difference straight away, but it will happen eventually, even when the sun exposure is indirect.

The colour change is just part of the natural features of using wood as a flooring option and it can definitely make the floor look warm and inviting. So as long as you are aware of this from the outset, and continue to keep it well-maintained, you can always get enjoyment from your beautiful wooden floor.

HARDWOOD FLOORING WILL BRING YOUR ROOM TO LIFE

For those that are contemplating having hardwood floors fitted in their home, it is required to take into consideration that wood is a living material and so unlike the timber imitations you can purchase on the market.

While the timber might not be part of the tree no more, and has ceased to grow, it will still change according to the environment where it is placed. However, this should not be a problem for householders wishing to install hardwood flooring in their living room or bedroom.

It is just something that you will need to get used to over time. Despite noticing that the floor will probably take some time to repay usually necessitating the entire four seasons — the character and warmth that such a floor can give you will certainly outweigh any concerns you might have.

To need to put up with a flooring that reacts to humidity, temperature and light as it has used to the area where it is installed is a small price to pay when you consider the numerous years of usage it can provide you, and of course the fact that the color will mellow, deepen and grow much more beautiful over time.

WOODEN FLOOR SANDING

Wooden flooring makes an amazing addition to any home, giving it a rustic yet fresh appearance. But, caring for wooden flooring can be difficult, especially if you’re dealing with old or worn wood. Sanding flooring is perhaps one of the most crucial tasks to tackle if you have wood floors. Sanding keeps wood floors smooth, removing any splinters which can be dangerous. It also keeps them gleaming instead of being caked in dirt.

Sanding hardwood flooring by hand can be incredibly hard and immensely time consuming, especially if you don’t know how to get it done. You might actually end up damaging the floors if you don’t sand them correctly. Rather, get the pros to sand your old and gnarled flooring for you. Here at Norwood Floor Sanding we not only sell beautiful brand new wooden flooring, but we also sand and also refurbish old wooden floors too. We could sand and resand hardwood parquet flooring as well as natural pine floorboards, restoring them to their former glory.

We have decades of experience behind us that we draw on in order to give you the ideal finish for your floors. We are experts at sanding hardwood floors and make certain you are left with a sleek and secure floor with a gorgeous finish. For examples of our work have a look at gallery which shows completed floors in addition to works in progress.

We can also update your flooring by staining them a different color. Some kinds of wood are better to stain than others, bamboo floors being the very best type to carry to staining. This offers a whole new look to a room without needing to take out and replace the floor.

When we work we ensure that security is our number one priority. We ensure we have appropriate ventilation and that our gear is stored and used safely. We treat our customers’ homes with respect and make sure that we clean up after ourselves. You are going to be left with a new-looking floor but no indication that we were there.

We provide our plumbing support into the Norwood area. If you are considering having your old wooden floors brought up to scratch, then contact us now. We offer a complimentary consultation service at which we discuss your needs. You can even view our comprehensive portfolio and discuss with our specialist staff what the job will entail.

Call today to make your old floors look brand new!

How to save your wooden floor for a lifetime?

How to save your wooden floor for a lifetime?

A lot of people prefer wooden flooring for their homes or offices. And that’s understandable – hardwood flooring looks so classy! But when you have this type of flooring, you have to know that it’s really important to take care of it.
Hardwood flooring is smooth and to keep it surface like that we recommend you to be careful not to damage it. It needs care – just like everything luxurious. That’s why we created that kind of floor care that can keep the wood looking fresh as long as possible!
Wе offer brand new floor sanding techniques for those who have already damaged their floors. Our machines are 99% dust free, and also are gentle to the wooden ground. Floor sanding is amazing and propriate if you want to invest in the long lasting “life” of your parquet.
Another good way to take care of your hardwood floor is polishing. Our firm has many different types of top coats. If you want something more cheerful, our experts can offer you colourful polishing. That’s awesome! And kids love it ! We adore to see the smiles on their faces, when they play with pleasure on the refreshed ground.
So, if you think that it’s time to refresh the atmosphere at home – take a look at our new offers and contact us now for free!

Top 5 Softwoods

Top 5 Softwoods

PINE-Pine is a softwood which grows in most areas of the Northern Hemisphere. There are more than 100 species worldwide.
ASH-There are 16 species of ash which grow in the eastern United States. Of these, the white ash is the largest and most commercially important.
HICKORY-There are 15 species of hickory in the eastern United States, eight of which are commercially important.
BEECH-The American beech is a single species which grows in the eastern half of the United States.
BIRCH-There are many species of birch. The yellow birch is the most commercially important. European birch is fine grained, rare and expensive.

 

Never Do To A Wood Floor…

10 Things To Never Do To A Wood Floor
1.Do not use abrasives or harsh chemicals to clean your floor
2.Do not use hard casters on any furniture directly on your hardwood floor
3.Do not use steam mops on your hardwood floor
4.Do not pour cleaning product directly on floor
5.Do not wait too long between refinish projects
6.Do not wear high heel shoes on wood floors
7.Do not leave the legs of your furniture unprotected
8.Do not drag furniture or heavy appliances over your hardwood floors
9.Do not let your dog’s nails remain untrimmed
10.Do not allow any stains remain untreated !

Clean Hardwood Floors Tips

The Best Ways to Clean Hardwood Floors

-Prep your floor for cleaning by sweeping or dust-mopping to get rid of large particles of dirt and debris.
-Use a pH neutral cleaner that will be gentle on your hardwood floors.
-Use a fine spray mist to clean your floor in sections. Avoid putting too much liquid on your floors.
-Use a microfiber mop to clean. Traditional mops can work, but they can leave excess water on your floors.
-Skip using white vinegar and water to clean your floors. Using a specially formulated hardwood floor care cleaner is a smart way to maintain the beauty and look of your floors.

 

Restoration of wooden floors

We can give you a estimate over the phone or via email if you have the dimensions, as We work on a rate per sq meter or sq yard the estimate will allow for minor repairs,sanding and finishing with three coats of varnish.
If the price quoted seems reasonable, We will then visit your home to look at the floor and discuss your thoughts, concerns and ideas for the project.
We will then send you a written estimate or email you an estimate for the work.
If you would like to go ahead We will give you a date on which We will hope to start your room. We do not charge for my estimates or advice.

If you have a floor in need of some care and attention, please contact us for a no-obligation quote.